working on changes, and debugging

playbooks/mpdf.conf.j2

@@ -24,7 +24,7 @@ database {
 # playlist files not created by the server but only if they are in the MPD
 # format. This setting defaults to playlist saving being disabled.
 #
-playlist_directory	 {{ [path,item,playlist_directory]|join() }}
+playlist_directory	 "{{ [path,item,playlist_directory]|join() }}"
 #
 # This setting sets the location of the MPD database. This file is used to
 # load the database at server start up and store the database while the
@@ -32,7 +32,7 @@ playlist_directory	 {{ [path,item,playlist_directory]|join() }}
 # MPD to accept files over ipc socket (using file:// protocol) or streaming
 # files over an accepted protocol.
 #
-db_file	     {{ [path,item,db_file]|join() }}
+db_file	     "{{ [path,item,db_file]|join() }}"
 
 #
 # These settings are the locations for the daemon log files for the daemon.
@@ -42,26 +42,26 @@ db_file	     {{ [path,item,db_file]|join() }}
 # The special value "syslog" makes MPD use the local syslog daemon. This
 # setting defaults to logging to syslog, otherwise logging is disabled.
 #
-log_file		 {{ [log_dir,'mpd',item,'.log']|join() }}
+log_file		 "{{ [log_dir,'mpd',item,'.log']|join() }}"
 #
 # This setting sets the location of the file which stores the process ID
 # for use of mpd --kill and some init scripts. This setting is disabled by
 # default and the pid file will not be stored.
 #
-pid_file		{{ [path,pid_file,item]|join() }}
+pid_file		"{{ [path,pid_file,item]|join() }}"
 #
 # This setting sets the location of the file which contains information about
 # most variables to get MPD back into the same general shape it was in before
 # it was brought down. This setting is disabled by default and the server
 # state will be reset on server start up.
 #
-state_file		{{ [path,state_file,item]|join() }}
+state_file		"{{ [path,state_file,item]|join() }}"
 
 #
 # The location of the sticker database.  This is a database which
 # manages dynamic information attached to songs.
 #
-sticker_file                  {{ [path,sticker_file,item,'.sql']|join() }}
+sticker_file                  "{{ [path,sticker_file,item,'.sql']|join() }}"
 
 ###############################################################################
 
@@ -73,7 +73,7 @@ sticker_file                  {{ [path,sticker_file,item,'.sql']|join() }}
 # initialization. This setting is disabled by default and MPD is run as the
 # current user.
 #
-user			 {{ user }}
+user			 "{{ user }}"
 
 #
 # This setting specifies the group that MPD will run as. If not specified
@@ -82,7 +82,7 @@ user			 {{ user }}
 # have permission to use sound card.
 #
 #group                          "nogroup"
-group {{ group }}
+group "{{ group }}"
 #
 # This setting sets the address for the daemon to listen on. Careful attention
 # should be paid if this is assigned to anything other then the default, any.
@@ -90,7 +90,7 @@ group {{ group }}
 # to have mpd listen on every address
 #
 # For network
-bind_to_address {{ bind_to_address }}
+bind_to_address "{{ bind_to_address }}"
 #
 # And for Unix Socket
 #bind_to_address		"/var/run/mpd/socket"
@@ -99,7 +99,7 @@ bind_to_address {{ bind_to_address }}
 # to.
 #
 #port				"6600"
-port {{ mpdport  + item }}
+port "{{ mpdport  + item }}"
 
 #
 # This setting controls the type of information which is logged. Available
@@ -108,7 +108,7 @@ port {{ mpdport  + item }}
 # available resources on limited hardware storage.
 #
 #log_level			"default"
-log_level {{ log_level }}
+log_level "{{ log_level }}"
 
 #
 # If you have a problem with your MP3s ending abruptly it is recommended that
@@ -118,35 +118,35 @@ log_level {{ log_level }}
 # point gapless MP3 playback can be enabled.
 #
 #gapless_mp3_playback			"yes"
-gapless_mp3_playback {{ gapless_mp3_playback }}
+gapless_mp3_playback "{{ gapless_mp3_playback }}"
 
 #
 # This setting enables MPD to create playlists in a format usable by other
 # music players.
 #
 #save_absolute_paths_in_playlists	"no"
-save_absolute_paths_in_playlists {{ save_absolute_paths_in_playlists }}
+save_absolute_paths_in_playlists "{{ save_absolute_paths_in_playlists }}"
 #
 # This setting defines a list of tag types that will be extracted during the
 # audio file discovery process. Optionally, 'comment' can be added to this
 # list.
 #
 #metadata_to_use	"artist,album,title,track,name,genre,date,composer,performer,disc"
-metadata_to_use {{ metadata_to_use }}
+metadata_to_use "{{ metadata_to_use }}"
 
 #
 # This setting enables automatic update of MPD's database when files in
 # music_directory are changed.
 #
 #auto_update    "yes"
-auto_update {{ auto_update }} 
+auto_update "{{ auto_update }}" 
 
 #
 # Limit the depth of the directories being watched, 0 means only watch
 # the music directory itself.  There is no limit by default.
 #
 #auto_update_depth "3"
-auto_update_depth {{ auto_update_depth }}
+auto_update_depth "{{ auto_update_depth }}"
 
 #
 ###############################################################################
@@ -158,14 +158,14 @@ auto_update_depth {{ auto_update_depth }}
 # symbolic links outside of the configured music_directory.
 #
 #follow_outside_symlinks	"yes"
-follow_outside_symlinks {{ follow_outside_symlinks }}
+follow_outside_symlinks "{{ follow_outside_symlinks }}"
 
 #
 # If this setting is set to "yes", MPD will discover audio files by following
 # symbolic links inside of the configured music_directory.
 #
 #follow_inside_symlinks		"yes"
-follow_inside_symlinks {{ follow_inside_symlinks }}
+follow_inside_symlinks "{{ follow_inside_symlinks }}"
 
 #
 ###############################################################################
@@ -177,13 +177,13 @@ follow_inside_symlinks {{ follow_inside_symlinks }}
 # Zeroconf / Avahi.
 #
 #zeroconf_enabled		"yes"
-zeroconf_enabled {{ zeroconf_enabled }}
+zeroconf_enabled "{{ zeroconf_enabled }}"
 #
 # The argument to this setting will be the Zeroconf / Avahi unique name for
 # this MPD server on the network.
 #
 #zeroconf_name			"Music Player"
-zeroconf_name {{ zeroconf_name }}
+zeroconf_name "{{ zeroconf_name }}"
 #
 ###############################################################################
 
@@ -199,7 +199,7 @@ password                        "HelloKitty@read,add,control,admin"
 # This setting specifies the permissions a user has who has not yet logged in.
 #
 #default_permissions             "read,add,control,admin"
-default_permissions {{ default_permissions }}
+default_permissions "{{ default_permissions }}"
 
 #
 ###############################################################################
@@ -288,10 +288,10 @@ audio_output {
         type            "httpd"
         always_on       "yes"
         enabled         "yes"
-        name            "{{ stream }}"
+        name            ""{{ stream }}""
         encoder         "lame"          # optional, vorbis or lame
-        port            "{{ stream_port + item }}"
-        bind_to_address "{{ bind_address }}"               # optional, IPv4 or IPv6
+        port            ""{{ stream_port + item }}""
+        bind_to_address ""{{ bind_address }}""               # optional, IPv4 or IPv6
         quality         "3.0"                   # do not define if bitrate is defined
 #       bitrate         "128"                   # do not define if quality is defined
 #       format          "44100:16:1"
@@ -367,7 +367,7 @@ audio_output {
 #
 #mixer_type			"disabled"
 #
-mixer_type {{ mixer_type }}
+mixer_type "{{ mixer_type }}"
 
 ###############################################################################
 
@@ -379,20 +379,20 @@ mixer_type {{ mixer_type }}
 # details. This setting is disabled by default.
 #
 #replaygain			"album"
-replaygain {{ replaygain }}
+replaygain "{{ replaygain }}"
 #
 # This setting sets the pre-amp used for files that have ReplayGain tags. By
 # default this setting is disabled.
 #
 #replaygain_preamp		"0"
-replaygain_preamp {{ replaygain_preamp }}
+replaygain_preamp "{{ replaygain_preamp }}"
 #
 # This setting enables on-the-fly normalization volume adjustment. This will
 # result in the volume of all playing audio to be adjusted so the output has
 # equal "loudness". This setting is disabled by default.
 #
 #volume_normalization		"no"
-volume_normalization {{ volume_normalization }}
+volume_normalization "{{ volume_normalization }}"
 #
 ###############################################################################
 
@@ -404,14 +404,14 @@ volume_normalization {{ volume_normalization }}
 # are doing.
 #
 #audio_buffer_size		"2048"
-audio_buffer_size {{ audio_buffer_size }}
+audio_buffer_size "{{ audio_buffer_size }}"
 #
 # This setting controls the percentage of the buffer which is filled before
 # beginning to play. Increasing this reduces the chance of audio file skipping,
 # at the cost of increased time prior to audio playback.
 #
 #buffer_before_play		"10%"
-buffer_before_play {{ buffer_before_play }}
+buffer_before_play "{{ buffer_before_play }}"
 #
 ###############################################################################