|
- # An example configuration file for MPD
- # See the mpd.conf man page for a more detailed description of each parameter.
-
-
- # Files and directories #######################################################
- #
- # This setting controls the top directory which MPD will search to discover the
- # available audio files and add them to the daemon's online database. This
- # setting defaults to the XDG directory, otherwise the music directory will be
- # be disabled and audio files will only be accepted over ipc socket (using
- # file:// protocol) or streaming files over an accepted protocol.
- #
- database {
- host "mpdb"
- port "8888"
- password "password"
- keepalive "yes"
- }
-
- #music_directory
- #
- # This setting sets the MPD internal playlist directory. The purpose of this
- # directory is storage for playlists created by MPD. The server will use
- # playlist files not created by the server but only if they are in the MPD
- # format. This setting defaults to playlist saving being disabled.
- #
- playlist_directory "{{ [path,item,playlist_directory]|join() }}"
- #
- # This setting sets the location of the MPD database. This file is used to
- # load the database at server start up and store the database while the
- # server is not up. This setting defaults to disabled which will allow
- # MPD to accept files over ipc socket (using file:// protocol) or streaming
- # files over an accepted protocol.
- #
- db_file "{{ [path,item,db_file]|join() }}"
-
- #
- # These settings are the locations for the daemon log files for the daemon.
- # These logs are great for troubleshooting, depending on your log_level
- # settings.
- #
- # The special value "syslog" makes MPD use the local syslog daemon. This
- # setting defaults to logging to syslog, otherwise logging is disabled.
- #
- log_file "{{ [log_dir,'mpd',item,'.log']|join() }}"
- #
- # This setting sets the location of the file which stores the process ID
- # for use of mpd --kill and some init scripts. This setting is disabled by
- # default and the pid file will not be stored.
- #
- pid_file "{{ [path,pid_file,item]|join() }}"
- #
- # This setting sets the location of the file which contains information about
- # most variables to get MPD back into the same general shape it was in before
- # it was brought down. This setting is disabled by default and the server
- # state will be reset on server start up.
- #
- state_file "{{ [path,state_file,item]|join() }}"
-
- #
- # The location of the sticker database. This is a database which
- # manages dynamic information attached to songs.
- #
- sticker_file "{{ [path,sticker_file,item,'.sql']|join() }}"
-
- ###############################################################################
-
-
- # General music daemon options ################################################
- #
- # This setting specifies the user that MPD will run as. MPD should never run as
- # root and you may use this setting to make MPD change its user ID after
- # initialization. This setting is disabled by default and MPD is run as the
- # current user.
- #
- user "{{ user }}"
-
- #
- # This setting specifies the group that MPD will run as. If not specified
- # primary group of user specified with "user" setting will be used (if set).
- # This is useful if MPD needs to be a member of group such as "audio" to
- # have permission to use sound card.
- #
- #group "nogroup"
- group "{{ group }}"
- #
- # This setting sets the address for the daemon to listen on. Careful attention
- # should be paid if this is assigned to anything other then the default, any.
- # This setting can deny access to control of the daemon. Choose any if you want
- # to have mpd listen on every address
- #
- # For network
- bind_to_address "{{ bind_to_address }}"
- #
- # And for Unix Socket
- #bind_to_address "/var/run/mpd/socket"
- #
- # This setting is the TCP port that is desired for the daemon to get assigned
- # to.
- #
- #port "6600"
- port "{{ mpdport + item }}"
-
- #
- # This setting controls the type of information which is logged. Available
- # setting arguments are "default", "secure" or "verbose". The "verbose" setting
- # argument is recommended for troubleshooting, though can quickly stretch
- # available resources on limited hardware storage.
- #
- #log_level "default"
- log_level "{{ log_level }}"
-
- #
- # If you have a problem with your MP3s ending abruptly it is recommended that
- # you set this argument to "no" to attempt to fix the problem. If this solves
- # the problem, it is highly recommended to fix the MP3 files with vbrfix
- # (available as vbrfix in the debian archive), at which
- # point gapless MP3 playback can be enabled.
- #
- #gapless_mp3_playback "yes"
- gapless_mp3_playback "{{ gapless_mp3_playback }}"
-
- #
- # This setting enables MPD to create playlists in a format usable by other
- # music players.
- #
- #save_absolute_paths_in_playlists "no"
- save_absolute_paths_in_playlists "{{ save_absolute_paths_in_playlists }}"
- #
- # This setting defines a list of tag types that will be extracted during the
- # audio file discovery process. Optionally, 'comment' can be added to this
- # list.
- #
- #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
- metadata_to_use "{{ metadata_to_use }}"
-
- #
- # This setting enables automatic update of MPD's database when files in
- # music_directory are changed.
- #
- #auto_update "yes"
- auto_update "{{ auto_update }}"
-
- #
- # Limit the depth of the directories being watched, 0 means only watch
- # the music directory itself. There is no limit by default.
- #
- #auto_update_depth "3"
- auto_update_depth "{{ auto_update_depth }}"
-
- #
- ###############################################################################
-
-
- # Symbolic link behavior ######################################################
- #
- # If this setting is set to "yes", MPD will discover audio files by following
- # symbolic links outside of the configured music_directory.
- #
- #follow_outside_symlinks "yes"
- follow_outside_symlinks "{{ follow_outside_symlinks }}"
-
- #
- # If this setting is set to "yes", MPD will discover audio files by following
- # symbolic links inside of the configured music_directory.
- #
- #follow_inside_symlinks "yes"
- follow_inside_symlinks "{{ follow_inside_symlinks }}"
-
- #
- ###############################################################################
-
-
- # Zeroconf / Avahi Service Discovery ##########################################
- #
- # If this setting is set to "yes", service information will be published with
- # Zeroconf / Avahi.
- #
- #zeroconf_enabled "yes"
- zeroconf_enabled "{{ zeroconf_enabled }}"
- #
- # The argument to this setting will be the Zeroconf / Avahi unique name for
- # this MPD server on the network.
- #
- #zeroconf_name "Music Player"
- zeroconf_name "{{ zeroconf_name }}"
- #
- ###############################################################################
-
-
- # Permissions #################################################################
- #
- # If this setting is set, MPD will require password authorization. The password
- # can setting can be specified multiple times for different password profiles.
- #
- password "HelloKitty@read,add,control,admin"
-
- #
- # This setting specifies the permissions a user has who has not yet logged in.
- #
- #default_permissions "read,add,control,admin"
- default_permissions "{{ default_permissions }}"
-
- #
- ###############################################################################
-
-
- # Input #######################################################################
- #
-
- input {
- plugin "curl"
- # proxy "proxy.isp.com:8080"
- # proxy_user "user"
- # proxy_password "password"
- }
-
- #
- ###############################################################################
-
- # Audio Output ################################################################
- #
- # MPD supports various audio output types, as well as playing through multiple
- # audio outputs at the same time, through multiple audio_output settings
- # blocks. Setting this block is optional, though the server will only attempt
- # autodetection for one sound card.
- #
- # See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
- # other audio outputs.
- #
- # An example of an ALSA output:
- #
- #audio_output {
- # type "alsa"
- # name "My ALSA Device"
- # device "hw:0,0" # optional
- # format "44100:16:2" # optional
- # mixer_device "default" # optional
- # mixer_control "PCM" # optional
- # mixer_index "0" # optional
- #}
- #
- # An example of an OSS output:
- #
- #audio_output {
- # type "oss"
- # name "My OSS Device"
- # device "/dev/dsp" # optional
- # format "44100:16:2" # optional
- # mixer_device "/dev/mixer" # optional
- # mixer_control "PCM" # optional
- #}
- #
- # An example of a shout output (for streaming to Icecast):
- #
- #audio_output {
- # type "shout"
- # encoding "ogg" # optional
- # name "My Shout Stream"
- # host "localhost"
- # port "8000"
- # mount "/mpd.ogg"
- # password "hackme"
- # quality "5.0"
- # bitrate "128"
- # format "44100:16:1"
- # protocol "icecast2" # optional
- # user "source" # optional
- # description "My Stream Description" # optional
- # genre "jazz" # optional
- # public "no" # optional
- # timeout "2" # optional
- #}
- #
- # An example of a recorder output:
- #
- #audio_output {
- # type "recorder"
- # name "My recorder"
- # encoder "vorbis" # optional, vorbis or lame
- # path "/var/lib/mpd/recorder/mpd.ogg"
- ## quality "5.0" # do not define if bitrate is defined
- # bitrate "128" # do not define if quality is defined
- # format "44100:16:1"
- #}
- #
- audio_output {
- type "httpd"
- always_on "yes"
- enabled "yes"
- name "{{ stream }}"
- encoder "lame" # optional, vorbis or lame
- port "{{ stream_port + item }}"
- bind_to_address "{{ bind_address }}" # optional, IPv4 or IPv6
- quality "3.0" # do not define if bitrate is defined
- # bitrate "128" # do not define if quality is defined
- # format "44100:16:1"
- max_clients "0" # optional 0=no limit
- }
- # An example of a pulseaudio output (streaming to a remote pulseaudio server)
- #
- #audio_output {
- # type "pulse"
- # name "My Pulse Output"
- # server "remote_server" # optional
- # sink "remote_server_sink" # optional
- }
- #
- ## Example "pipe" output:
- #
- #audio_output {
- # type "pipe"
- # name "my pipe"
- # command "aplay -f cd 2>/dev/null"
- ## Or if you're want to use AudioCompress
- # command "AudioCompress -m | aplay -f cd 2>/dev/null"
- ## Or to send raw PCM stream through PCM:
- # command "nc example.org 8765"
- # format "44100:16:2"
- #}
- #
- ## An example of a null output (for no audio output):
- #
- #audio_output {
- # type "null"
- # name "My Null Output"
- #}
- #
- # This setting will change all decoded audio to be converted to the specified
- # format before being passed to the audio outputs. By default, this setting is
- # disabled.
- #
- #audio_output_format "44100:16:2"
- #
- # If MPD has been compiled with libsamplerate support, this setting specifies
- # the sample rate converter to use. Possible values can be found in the
- # mpd.conf man page or the libsamplerate documentation. By default, this is
- # setting is disabled.
- #
- #samplerate_converter "Fastest Sinc Interpolator"
- #
- ###############################################################################
-
- ###############################################################################
-
- # Volume control mixer ########################################################
- #
- # These are the global volume control settings. By default, this setting will
- # be detected to the available audio output device, with preference going to
- # hardware mixing. Hardware and software mixers for individual audio_output
- # sections cannot yet be mixed.
- #
- # An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
- # setting is used other sound applications will be affected by the volume
- # being controlled by MPD.
- #
- #mixer_type "hardware"
- #
- # An example for controlling all mixers through software. This will control
- # all controls, even if the mixer is not supported by the device and will not
- # affect any other sound producing applications.
- #
- #mixer_type "software"
- #
- # This example will not allow MPD to touch the mixer at all and will disable
- # all volume controls.
- #
- #mixer_type "disabled"
- #
- mixer_type "{{ mixer_type }}"
-
- ###############################################################################
-
-
- # Normalization automatic volume adjustments ##################################
- #
- # This setting specifies the type of ReplayGain to use. This setting can have
- # the argument "album" or "track". See <http://www.replaygain.org> for more
- # details. This setting is disabled by default.
- #
- #replaygain "album"
- replaygain "{{ replaygain }}"
- #
- # This setting sets the pre-amp used for files that have ReplayGain tags. By
- # default this setting is disabled.
- #
- #replaygain_preamp "0"
- replaygain_preamp "{{ replaygain_preamp }}"
- #
- # This setting enables on-the-fly normalization volume adjustment. This will
- # result in the volume of all playing audio to be adjusted so the output has
- # equal "loudness". This setting is disabled by default.
- #
- #volume_normalization "no"
- volume_normalization "{{ volume_normalization }}"
- #
- ###############################################################################
-
-
- # MPD Internal Buffering ######################################################
- #
- # This setting adjusts the size of internal decoded audio buffering. Changing
- # this may have undesired effects. Don't change this if you don't know what you
- # are doing.
- #
- #audio_buffer_size "2048"
- audio_buffer_size "{{ audio_buffer_size }}"
- #
- # This setting controls the percentage of the buffer which is filled before
- # beginning to play. Increasing this reduces the chance of audio file skipping,
- # at the cost of increased time prior to audio playback.
- #
- #buffer_before_play "10%"
- buffer_before_play "{{ buffer_before_play }}"
- #
- ###############################################################################
-
-
- # Resource Limitations ########################################################
- #
- # These settings are various limitations to prevent MPD from using too many
- # resources. Generally, these settings should be minimized to prevent security
- # risks, depending on the operating resources.
- #
- #connection_timeout "60"
- #max_connections "10"
- #max_playlist_length "16384"
- #max_command_list_size "2048"
- max_output_buffer_size "32768"
- #
- ###############################################################################
-
-
- # Character Encoding ##########################################################
- #
- # If file or directory names do not display correctly for your locale then you
- # may need to modify this setting. After modification of this setting mpd
- # --create-db must be run to change the database.
- #
- filesystem_charset "UTF-8"
- #
- # This setting controls the encoding that ID3v1 tags should be converted from.
- #
- id3v1_encoding "UTF-8"
- #
- ###############################################################################
- # SIDPlay decoder #############################################################
- #
- # songlength_database:
- # Location of your songlengths file, as distributed with the HVSC.
- # The sidplay plugin checks this for matching MD5 fingerprints.
- # See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
- #
- # default_songlength:
- # This is the default playing time in seconds for songs not in the
- # songlength database, or in case you're not using a database.
- # A value of 0 means play indefinitely.
- #
- # filter:
- # Turns the SID filter emulation on or off.
- #
- #decoder {
- # plugin "sidplay"
- # songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
- # default_songlength "120"
- # filter "true"
- #}
- #
- ###############################################################################
|